User's Guide

19
PLAYBACK ON THE TELEVISION
18
Display the images stored in the camera on a television set.
• Only television sets with a VIDEO IN terminal can be used.
1.Turn off the television and the camera.
2.Insert the video out jack-plug of the video cable into the
VIDEO OUT terminal on the camera. Insert the video in
cinch plug into the VIDEO IN terminal on the television.
3.Turn the camera and television on, then set the TV
channel to that used for video input (check the user’s
manual that accompanied your television set).
4.The procedure for viewing images on the TV is the
same as for viewing images on the camera’s monitor.
Video In
(cinch plug end)
Insert this end into
the television.
Video Out
(jack-plug end)
Insert this end into
the camera.