User's Guide

17
PLAYBACK ON THE CAMERA
16
The LCD monitor brightness can be adjusted to compensate for
varying lighting conditions and viewing angles.
The frame number will appear in the upper-right
corner if Display Data is on. Press the display
button to turn Display Data on and off.
PROCESSING appears while the image comes
into view.
If there are no images stored in the camera, NO
PICTURES will appear on the LCD monitor when
the camera is in play mode.
Turn the LCD brightness-control dial
until the desired brightness level is
reached.
• Adjusting the monitor brightness does not affect
exposure or the image data in the camera.
1.Slide the record/play switch to
PLAY.
2.Press the main switch to turn
the camera on.
• The last image recorded will appear.
3.Use the + or – button to scroll
through the images.
• The + button goes to the next frame.
The – button goes to the previous
frame.
• Press and hold the button for 2 seconds
to begin a continuous scroll. Press
either button again to stop scrolling.
Display the recorded images on the camera’s LCD monitor.
ADJUSTING LCD MONITOR BRIGHTNESS