User's Guide

NEW FEATURES FOR Dimâge EX Version 2
123
NEW FEATURES FOR DIMÂGE EX VERSION 2
122
6. CUSTOM SETTINGS FOR WHITE BALANCE HAS BEEN
ADDED
(see User’s Manual P55)
In addition to the preset white balance the Dimâge EX allows custom setting of white balance in
accordance with the user’s own white balance sample.
Display the menu screen using the
menu button, highlight [Photo
Script] [White Balance], and
press the Edit soft key.
Highlight [Custom].
Point the lens towards the white
balance sample and press the
Select soft key.
• The custom white balance is set.
• Ensure that the white balance sample is large enough
to fill the viewfinder.
• After the custom white balance is set the screen
returns to the condition in step 1. above. Press the
End soft key to return to the initial (live image)
screen.
• A custom white balance once set is maintained until
another white balance is selected, or the camera
power supply is switched OFF. Switching the camera
power supply OFF clears the custom white balance.
5. A FLASH BRACKETING FUNCTION HAS BEEN ADDED
By changing the flash illumination in steps the exposure for the background not reached by the flash
remains unchanged, while the exposure for the subject illuminated by the flash is bracketed.
The exposure for the subject is bracketed from ‘optimum’ ‘under exposed’ ‘over exposed’.
Display the menu screen using the
menu button, highlight [Photo
Script] [Flash Bracketing] and
press the Edit soft key.
Highlight the bracketing adjustment
increment required, and press the
Select soft key.
46
45
44
Wait until the flash is charged, and
then press the shutter button to
take the photograph.
Repeat step 3. above twice.
• This differs from the Bracketing (see P56 of the
User’s Manual) in that the shutter is pressed three
times for each series of three exposures.
• When flash bracketing is selected, the numbers at the
right of the overlay bar indicate whether the next
photograph is the 1st, 2nd, or 3rd of the three frames.
• Use flash bracketing only after checking that the
BUSY lamp is extinguished. Flash bracketing will not
operate correctly if photography is begun while this
BUSY lamp is lit (blinking).