User's Guide

23
COMPACT FLASH CARD - CONT’D
22
TURNING THE LCD MONITOR ON/OFF
ADJUSTING THE LCD BRIGHTNESS
Press the Display button to turn
the LCD monitor on or off.
• The camera’s power must be on to turn on
the LCD monitor.
Reduce battery consumption by turning off the LCD monitor when not needed.
Turn the Brightness-control dial
left or right until the desired
brightness level is reached.
• Adjusting the brightness of the LCD monitor
will not affect the image exposure.
The LCD monitor brightness can be adjusted to compensate for varying lighting conditions and viewing
angles.
ADJUSTING THE LCD MONITOR
Close the card-chamber cover
and slide it shut until it clicks.
Turn the camera off.
Open the card-chamber cover by
sliding it in the direction
indicated, then open the cover.
Pull the memory card straight
out.
• Close the card-chamber cover after
removing the card.
REMOVING THE COMPACT FLASH CARD
Always turn off the camera before removing a CompactFlash card! Data on the card will be
lost or damaged if it is inserted while the camera is on. Check the on LED is off before removing
the card.
Lift the card-release lever until it
is straight out, then press the
card-release lever to eject the
card.