Operation Manual

printed on the seal inside the chamber.
Turn the cover of the mercury battery chamber clockwise and make sure that it has been screwed tightly.
4.butkus.org
Meter Switch
The meter-switch will be put ON when the Lock Lever (3) placed under the Shutter Button (1) is turned so
that it comes in alignment with the red index point.
Unless pictures are to be taken, set the lever to "L" and the switch will be kept put OFF, preventing the
mercury battery cells from accidentally running down. At the same time, the shutter button wish be locked.
Use this system when the camera is to be carried around with the film cocking lever wound.
Check of Batteries