Operation Manual

To Mount a Lens:

Bring the red dot of the lens in line with the lens mount index mark (red dot) on the camera body and gently

sink the lens barrel into the camera. Grip the silver part of the lens barrel and turn it clockwise until it clicks

into position.

4.butkus.org

NOTES:

· When the lens is detached, see to it that dust will not come in the camera and lens barrel and the lens

surface will not be either scratched or marred with fingerprints. Under any circumstances, do not touch the

inner parts of the camera.

· When the lens is taken out of the camera over a certain length of time, use a camera body cap and a mount

cap which is snapped on to the rear part of the lens.

· When the lens is to be mounted on your camera, make sure that the lens is sunken into the camera while the

red dots of the lens and camera are aligned with each other

PHOTOGRAPHING IN STOPPED-DOWN METERING SYSTEM

The AR lens provided with an EE mark is so designed that light can be measured at the full opening of the

lens with automatic aperture either in EE or manual photography Exposure win be determined in the stopped-

down metering system for the following instances, however.

1. When an ARP lens equipped with manually preset aperture or an ARM lens with manual

click aperture is used 2. When automatic aperture cannot be put to use due to the utilization of

an extension ring and bellows.

3. When a KONICA FS, FP or FM, or a lens produced by other camera manufacturer is used for the