Operation Manual

to "Stopped-down Metering" on Page 57.)
BATTERY CHECK MARK: The Battery Check Mark (46) is used to check the serviceability of the
mercury battery cells which serve as the electric source of the meter. (Refer to 'Battery Check" on Page 16.)
ELECTRIC-EYE PHOTOGRAPHY
(Light Metering at Full Lens Opening)
This method is commonly used when pictures are taken under the EE system with an AR lens having the EE
mark.
1. Set Your Camera to EE Mark.
Turn the Aperture Ring (11) arid bring the EE Mark (4) in line with the index point. The EE lock will click
into position.
2. Determine Shutter Speed.
Turn the Shutter Speed Dial (17), select a reading on the Shutter Speed Scale (16) suitable for your subject
and bring it in line with the index mark. In normal circumstances, it is convenient to set the shutter speed to
1/125 see, for outdoor shooting and 1/30 sec. for indoor picture-taking.