User Manual Z-Fold Kit for Di650
CE Making (Declaration of Conformity) This product complies with the following EU directives: 89/336EEC, 73/23/EEC and 93/68/EEC directives. This declaration is valid for the area of the European Union.
Contents Overview of the Z-Fold Kit ..........................................................................2 Installation Space..............................................................................................2 Main Body and Z-Fold Kit..................................................................................2 Optional Equipment...........................................................................................3 External / Internal View of the Z-Fold Kit........................
Overview of the Z-Fold Kit Installation Space Unit: (mm) 100 331 410 100 174 650 950 670 766 656 741 1620 1620 1140 990 2435 1836 Di650 + ZK-2 Z-Fold Kit + FN-6 Finisher + Cover inserter B + C-404 Large capacity cassette Main Body and Z-Fold Kit ZK-2 Z-Fold Kit (option) ZK-2 Z-Fold Kit (option) punches file holes and/or Z-folds the output copies.
Overview of the Z-Fold Kit (continued) Optional Equipment PK-2/PK-5 Punch kit Cover inserter B Printer controller 64MB Memory (M64-1)/ 128MB Memory (M128-1)/ 256MB Memory (M256-1) HDD-2 Hard disk drive kit Key counter FN-112 Finisher C-403 Large capacity cassette Di650 main body FN-6 Finisher C-404 Large capacity cassette ZK-2 Z-Fold kit 3
Overview of the Z-Fold Kit (continued) External / Internal View of the Z-Fold Kit 4 Handle 3 Knob 2 Right lever 5 Left lever 6 Waste basket 1 Z-Fold kit front door 1 2 3 4 5 6 4 Z-Fold Kit front door opens to allow removal of mishandled paper or waste paper. Right lever opens to allow removal of mishandled paper. Knob can be turned to ease removal of mishandled paper. Handle can be withdrawn to allow removal of mishandled paper. Left lever opens to allow removal of mishandled paper.
Overview of the Z-Fold Kit (continued) Paper in Z-Fold Kit Paper Weight 50 ~ 170* g/m2 60 ~ 90 g/m2 for Z-Fold mode * Some 170 g/m2 paper types may not be punched easily. Tray / Exit Tray Capacity Punch: Unlimited Z-Fold: One sheet only * See the following table for using Staple-sort and Z-Fold modes. Paper Size Punch: A3, B4, A4, B5 Z-Fold: A3, B4 All other paper sizes will be output without Z-fold or double-fold.
Overview of the Z-Fold Kit (continued) Specifications of ZK-2 Z-Fold Kit Paper size: (Punch) A3, B4, A4, B5 (Z-Fold) A3, B4 Paper weight: 50 ~ 170* g/m2 (60 ~ 90 g/m2 for Z-Fold mode) * Some 170 g/m2 paper types may not be punched easily. (Punch mode) Number of hole: 4 holes Hole diameter: 6.5 mm ± 0.5mm Hole pitch: 80mm ± 0.
Operation of the Z-Fold Kit Punching File Holes in Copies (Punch) The Punch mode is available only when the PK-2/PK-5 Punch kit or ZK-2 Z-Fold kit option is installed on the FN-112/FN-6 Finisher. If both PK-2/PK-5 Punch kit and ZK-2 Z-Fold kit are installed in the machine, the ZK-2 Z-Fold kit is used. When the Punch mode is selected in combination with any of the Primary (Main) tray output modes, each copied sheet is punched and output to the Primary tray according to the selected output mode.
Operation of the Z-Fold Kit (continued) 1. Touch OUTPUT MENU on the Basic Screen The Output Mode popup menu will be displayed. 2. Touch MAIN TRAY, if not highlighted. 3. Touch PUNCH. The Punch Position popup menu will be displayed. 4. 5. Touch the desired punch position key on the screen to highlight it. 6. Touch OK on the Output Mode popup menu to complete the setting and return to the Basic Screen. Touch OK on the Punch Position popup menu to restore the Output Mode popup menu.
Operation of the Z-Fold Kit (continued) 8. Select additional copying features, as required. 9. Enter the desired print quantity from the control panel keypad. 10. Position originals in the document handler. HINT See p. 3-2 to p. 3-4 of the main body Instruction Manual for details on positioning originals. 11. Press [Start]. CAUTION When the finisher exit tray capacity is exceeded due to the print quantity selected, remove the copied sets as they exit; otherwise, mishandled paper will occur.
Operation of the Z-Fold Kit (continued) Output Z-Folded Copies (Z-Fold) The Z-Fold mode is available only when Z-Fold kit option is installed on the FN-112/FN6 Finisher. When the Z-Fold mode is selected in combination with any of the Primary (main) tray output modes, the original image is copied on A3/B4 copy paper and output to the Primary (main) tray of the Finisher according to the selected output mode.
Operation of the Z-Fold Kit (continued) 3. Touch Z-FOLD to highlight it. 4. Touch OK on the Output Mode popup menu to complete the setting and return to the Basic Screen. The Z-Fold icon will be displayed in the OUTPUT icon area. 5. 6. 7. Select additional copying features, as required. Enter the desired print quantity from the control panel keypad. Position originals in the document handler. HINT See p. 3-2 to p. 3-4 of the main body Instruction Manual for details on positioning originals. 8.
Maintenance Empty Waste Basket of Z-Fold Kit When the waste basket becomes full, “Waste basket of Punching unit is full / Please empty waste basket” message will be displayed on the touch screen, and the finished set will be output without being punched even if Punch mode is selected. Follow the procedure below to empty the waste basket. 1. Open the Z-Fold kit front door with Finisher door handle. 2. Withdraw the waste basket.
Maintenance (continued) 3. Empty the waste basket. 4. Return the waste basket to its original position, then close the Z-Fold kit front door securely.
Key Operator Mode [17] Finisher Adjustment Use this mode to make fine adjustments to each function of the finisher.
Key Operator Mode (continued) 1st Fold Position Adjustment Screen 2nd Folding Position Adjustment Screen Three-Fold Position Adjustment Screen 2 Positions Staple Pitch Adjustment Screen Procedure 1 Touch [17] Finisher adjustment on the Key Operator Mode Screen to display the Finisher Adjustment Menu Screen. 2 Touch the desired menu key to display the adjustment screen for each function. 3 Make fine adjustment on the screen. To go on or back to another adjustment screen, touch NEXT or BACK.
Copyright 2002 MINOLTA CO., LTD. Printed in Japan The information contained in this manual is subject to change without notice to incorporate improvements made on the product or products the manual covers. 2002. 4 MINOLTA CO., LTD. 3-13, 2-chome, Azuchi-Machi, Chuo-ku, Osaka.
