User Guide

Managing Document Files
5
PageScope Workware 5-57
Erasing an Image (Selecting a Section)
Follow the procedure described below to change the image area specified
with the pointer trail to the specified color.
1 On the [Image] menu, click [Size and Color of Eraser].
The “Size and Color of Eraser” dialog box appears.
2 In the Size box, specify the size of the eraser pointer (between 1 and
30 pixels). The default setting is “10”.
3 In the Color box, specify the color of the erased area. Click the [Color]
button, and then select a color from the “color” dialog box that
appeared.
4 Click the [OK] button.
5 On the [Image] menu, click [Eraser(X)].
The pointer changes to an eraser pointer.
6 Move the pointer to the area to be erased.
The image area specified with the pointer trail is replaced with the
specified color.

Note
For monochrome or grayscale images, the specified area
automatically becomes black or gray.