Rückenbreite 15mm Frontsteite 148mm Bedienungsanleitung Di152/Di183 Minolta Europe GmbH Minoltaring 11 30855 Langenhagen Telefon +49 (0)5 11 74 04-0 Telefax +49 (0)5 11 74 04-50 Artikel-Nr. 9961 3344 01 Printed in Germany User Manual PageScope Light for CF2001P www.minoltaeurope.
Table of Contents 1 Welcome ....................................................................1-1 Trademark Acknowledgements .....................................................1-1 2 System Requirements ..............................................2-1 3 Access .......................................................................3-1 3.1 Operation ..................................................................................... 3-1 4 Screen Configuration .....................................
-2 PageScope Light CF2001P
Welcome 1 1 Welcome PageScope Light for CF2001P is a device control utility program provided by the HTTP server built into the CF2001P. With a standard Web browser, this utility can be used as an interface for remote control of the CF2001P. Trademark Acknowledgements Minolta is a registered trademark of MINOLTA CO., LTD. PageScope is a trademark of MINOLTA CO., LTD. Apple and Macintosh are registered trademarks of Apple Computer, Inc. Ethernet is a registered trademark of Xerox Corporation.
1 1-2 Welcome PageScope Light CF2001P
System Requirements 2 2 System Requirements The following items are required to use this utility. l Computer m Software Operating System Web Browser Windows 95/98/Me/NT 4.0/2000 Internet Explorer 4 or higher Netscape Navigator 4 or higher Macintosh System 7 or higher Internet Explorer 4.5 or higher Netscape Navigator 4 or higher Solaris 2.5.1/2.6/7 (2.
2 2-2 System Requirements PageScope Light CF2001P
Access 3 3 Access PageScope Light for CF2001P can be accessed directly from a Web browser. 1 Start the Web browser. 2 In the URL field, enter the IP address of the printer controller as shown below. http:/// (Example) When the IP address of the printer is 192.9.200.200: http://192.9.200.200/ 3 3.1 This causes PageScope Light for CF2001P screen to appear. Operation PageScope Light for CF2001P operation is identical to that for Internet Web pages.
3 3-2 Access PageScope Light CF2001P
Screen Configuration 4 4 Screen Configuration The configuration of the PageScope Light for CF2001P screen is shown below. NOTE Í Screen images shown in this manual may differ slightly from actual ones. Also note that specifications are subject to change without prior notice. 1. Minolta PageScope Light Logo Clicking the logo jumps to the Website below. www.minolta.com 2. Status Display The current status of the CF2001P is indicated by both icons and text.
Screen Configuration 4 3. Tabs Use the tabs to select the category of items you want to display. See the following sections of this document for detailed information about each tab. 4. Menus Use the menus to select information or setting items. The menus that appear depend on the currently selected tab. See the following sections of this document for detailed information about each menu. 5.
System Tab 5 5 System Tab The [System] tab shows information about and settings for the CF2001P system configuration. 5.1 Summary This screen is the initial screen when you access http:// with your Web browser. You can also display it by clicking the [Summary] menu on the [System] tab. It shows the current CF2001P system configuration. l l l Device Status This area uses graphics and text to show the configuration of options installed on the CF2001P.
System Tab 5 5.2 Details This screen appears when you click the “Details” menu on the [System] tab. It shows details about each of the CF2001P´s units. Clicking a submenu under the “Details” menu displays information about the applicable unit. Input Tray This screen appears when you click the [Input Tray] sub-menu under the “Details” menu. It shows the configuration of all the Input Trays installed on the CF2001P.
System Tab l 5 Paper Remaining paper status (Shows READY when paper is present, and EMPTY when there is no paper left.) Output Tray This screen appears when you click the [Output Tray] sub-menu under the “Details” menu. It shows the configuration of all the Output Trays installed on the CF2001P. l l l l Tray Tray name Capacity Maximum number of sheets the tray can hold Bin Name When the mail bin finisher is installed, owner name assigned to each bin.
System Tab 5 Hard Disk Status This screen appears when you click the [Hard Disk] sub-menu under the “Details” menu. It shows the status of the hard disk installed on the CF2001P.
System Tab 5 ROM Version This screen appears when you click the [ROM Version] sub-menu under the “Details” menu. It shows information about the on-board memory of the CF2001P.
System Tab 5 Interface Information This screen appears when you click the [Interface Info] sub-menu under the “Details” menu. It shows information about the printer interface.
System Tab 5 Consumable Status This screen appears when you click the [Consumable] sub-menu under the “Details” menu. It shows the current status of CF2001P consumables. For information about consumables, see the CF2001P User Manual.
System Tab 5 l l l l l l 5-8 Cyan Imaging Unit Cyan Imaging Unit service life status Fuser Unit Fuser Unit service life status Web Unit Web Unit service life status Transfer Belt Unit Transfer Belt Unit service life status Oil Coat Roller Unit Oil Coat Roller Unit service life status Staple Remaining staples PageScope Light CF2001P
System Tab 5.3 5 Preference This screen appears when you click the [Preference] menu on the “System” tab. It lets you make changes to the PageScope Light environment. l l l Password Type in the password here when a password is defined. Note that the password is case-sensitive, so be sure to type in upper-case and lower-case characters correctly. (The password you should type in here is the same as the administrator password you created for the Fiery WebTools.
System Tab 5 l l [Apply] Button Click this button to apply any settings you have input or selected up to this point. [Clear] Button Click this button to cancel any settings you have input or selected up to this point. Note The message “Invalid Password” appears on the screen if you input the wrong password. If this happens, click your Web browser´s “Back” button to return to the previous page and configure your preferences again. 5.
System Tab l l l l l l l 5 Fiery WebTools.) Contact Type in the name of your product support counter. Contact Tel Number Type in the phone number of your product support counter. Product Help URL Type in the URL of your product information Website. Clicking the [Product Help URL] jumps to the Website you specify here. Minolta Corporate URL Type in the URL to the Minolta home page. Clicking the [Minolta Corporate URL] jumps to the Website you specify here.
5 5-12 System Tab PageScope Light CF2001P
Printer Tab 6 6 Printer Tab The “Printer” tab shows information and settings for printing on the CF2001P. 6.1 Printer Front Panel This screen appears when you click the [Operational Panel] menu on the “Printer” tab. It provides on-screen emulation of the CF2001P operational panel. l l Display This area shows the printer controller message display. Messages are the same as those that appear on CF2001P operational panel.
Printer Tab 6 6.2 Test Print This screen appears when you click the [Test Print] menu on the “Printer” tab. It lets you select a test print page and execute a test print operation. l l l l l 6-2 Config Page Insert a check mark into the box to print the printer setup page. PostScript Demo Page Insert a check mark into the box to print the PostScript demo page. PostScript Font List Insert a check mark into the box to print the PostScript font list.
Printer Tab 6.3 6 PostScript Font This screen appears when you click the [Font Info] menu on the “Printer” tab. It shows a list of PostScript fonts built into the printer controller. The names of fonts downloaded to the printer controller from the computer are added to the bottom of the list.
6 6-4 Printer Tab PageScope Light CF2001P
Appendix Status List 7 7 Appendix Status List The current CF2001P status is indicated by an icon in the upper part of the window. More detailed messages appear in the text area next to the icon. The contents of the list are arranged in order of importance (most critical first).
Appendix Status List 7 Icon Status (Upper Text) Details (Lower Text) Attention Off Line Connection to the printer controller network is offline. Image Lost Image data was lost Capacity Over Waste toner bottle is full. Description Option Parts Malfunction Ready Paper Empty Paper tray is empty Paper Near Empty Tray is about to run out of paper. Life of Parts Consumable is depleted Near Life of Parts Consumable is nearing depletion.
