User Guide

Print Controller PostScript Option 3-27
Chapter 3 Printer Driver
6. Click the [OK] button to close the [Properties window].
7. Make other settings as required, and click the [OK] button to close the
[Print] dialog.
8. The [Fax Send Confirmation] message will appear. Then click the [OK]
button.
Your file will be sent via fax to the recipient.
● Fax Mode
The following describes how to set the Print after send, Delay Transmission, Sub
Address, and Sender ID settings.
Sending a file at a predetermined time
Checking [Delay Transmission] lets a file be sent at a predetermined time.
You can directly enter a desired time into the [Send Time] box. Or you can click
the [▼] or [▲] button next to the [Send Time] box.
When using the Delay Transmission feature, check to be sure that the
time indication on your computer coincides with the time indication on
the copier. If there is any discrepancy,the file may be held for as long
as 23 hours and 59 minutes before it is sent.
Sending a fax with F-code
Checking [Sub Address] and [Sender ID] allows you to enter a sub address and
sender ID for sending a fax with F-code.
For details on Sub Address and Sender ID, refer to your Fax Kit User’s
Guide.