User Guide

Print Controller PostScript Option 3-15
Chapter 3 Printer Driver
[Advanced Settings] Dialog box – [Duplex] tab
Duplex Printing: The [None] setting is selected and cannot be changed.
Log/Phys
Prints a different paper size without reducing/enlarging the printing size. This
enables printing of crop marks and shadows corresponding to the original
paper size.
Crop Mark: Determines presence and size of crop marks.
Position: Determines where to print on the output paper.
[Advanced Settings] Dialog box – [Log/Phys] tab
Application Page Size:Displays the determined paper size using the [Original
Paper] setting.
Target Paper Size:Sets the actual paper size to be printed. This is linked to
[Paper], [Output Paper] of the [Setup] tab.
Crop Marks: Determines presence and size of crop marks. This is linked
to [Layout], [Crop Marks] of the [Setup] tab.
[Advanced Settings] Dialog box – [Layout] tab
Page Placement: Determines where to print on the output paper. This is linked
to [Layout], [Position] of the [Setup] tab.
Size/Orientation change handling: Determines the output method when a mix-
ture of pages with different paper sizes and printing orienta-
tion is used.
[Advanced Settings] Dialog box – [Duplex] tab
Duplex Printing: Select between the [None], [Flip On Long Edge] and [Flip On
Short Edge] settings.