User Guide

3-14 Print Controller PostScript Option
Chapiter 3 Printer Driver
[Advanced Settings] Dialog box – [Layout] tab
Page Placement: Determines where to print when performing scaled printing.
This is linked to [Layout], [Position] of the [Setup] tab.
Size/Orientation change handling:Determines the output method when a mixture
of pages with different paper sizes and printing orientation is
used.
[Advanced Settings] Dialog box – [Duplex] tab
Duplex Printing: Select between the [None], [Flip on Long Edge] and [Flip on
Short Edge] settings.
Layout – Poster
Prints multiple pages at enlarged size.
Poster Style: Determines how pages are divided for enlargement.
Position: Determines where to print when performing poster style
printing.
Scale Factor: When selecting [Poster Style], [Custom], set the scale factor
in the range from 101 – 400%. The default setting is 150%.
• The Scale Factor is not available to be selected unless
you select [Custom] for Poster Style.
[Advanced Settings] Dialog box – [Poster] tab
Poster Style: Determines how pages are divided for enlargement.
Overlap: Determines the amount of overlap for the borders of the
divided page from, 0 – 150. The default setting is 100.
Scale Factor: When selecting [Poster Style], [Custom], set the scale factor
in the range from 101 – 400%. This is linked to [Layout],
[Poster Factor] of the [Setup] tab.
[Advanced Settings] Dialog box – [Layout] tab
Page Placement: Determines where to print when performing scaled printing.
This is linked to [Layout], [Position] of the [Setup] tab.
Size Units: The units for the gutters and the creeps are determined by
the dpi setting. The default setting is [Match Resolution].
Size/Orientation change handling: When a mixture of pages with different paper
sizes and printing orientation is used, determine the output
method.