User Guide

3-12 Print Controller PostScript Option
Chapiter 3 Printer Driver
Gutter: Allows you to set the white space between the facing pages
as printed out in the range of 0 to 150. The default is 100.
The [Gutter] setting can further be defined by the setting for
[Creep] on the [Layout] tab.
Bundle Size: Allows you to specify how many sheets to bind into a booklet.
The default [No Limit] allows you to bind all printed sheets
into a booklet.
[Advanced] Dialog Box - [Layout] Tab
Right to Left: When checked, arranges pages from right to left. When not
checked, pages are arranged from left to right.
Fill Bundles: When checked, causes all sheets that follow the boundary of
[Bundle Size] to take on the [Booklet] settings. In other
words, checking [Fill Bundles] overrides every setting except
[No Limit] for [Bundle Size] and produces the same effect as
selecting [No Limit].
[Fill Bundle_OFF]
1 2 8 9 9
A4/B5/A5 A4/B5/A5
7
A3/B4/A4 A3/B4/A4
1
2
8
5
3
4
6
[Fill Bundle_ON]
1 2 8 9
A4/B5/A5 A3/B4/A4 A3/B4/A4
1
2
9
3
4
A3/B4/A4
7
5
6
8
Gutter: Allows you to set the white space between the facing pages
as printed out in the range of 0 to 150. The [Gutter] setting in
[Layout] on the [Setup] tab changes accordingly.
Creep: Allows you to specify how far to expand the white space
between the facing pages printed on outer sheets, (outer
when bound into a booklet), in the range of 0 to 20. The
default is 0. You may want to define the [Size Units] setting to
specify how many sheets will take on the Creep setting.
Bundle Size: The size of the booklet is determined by the number of
pages. This is linked to [Lay-out] [Bundle Size] of the [Setup]
tab.