User Guide

Print Controller PostScript Option 3-7
Chapter 3 Printer Driver
Output Paper
Select the Output Paper from the list shown by clicking the [▼] button.
The paper size you can select are as follows:
Paper size to be selected
A3
A4
A5
B4
B5
8.5 x14
8.5 x 11
5.5 x 8.5
8K
16K
F4
11 x 17
If you change the setting for [Original Paper] , the setting for [Output Paper]
automatically changes accordingly. This is accessible by choosing [Paper] on
the [Setup] tab. If the setting for [Output Paper] is different from the setting for
[Original Paper], the scaling factor in [Layout] - [Fit] automatically changes
appropriately.
Source
Select the paper source from the list shown by clicking the [▼] button.
Default is [Auto Select].
When [Auto Select] is selected, a paper tray with paper which a user specified
from an application by using [KONICA 7020 PS on (Port name) : Properties] is
automatically selected.
Paper Type
Select the paper type from the list shown by clicking the [▼] button.
Default is [Plain].
• You have no choice but to select [Plain] unless you select [Output Tray 1] for
Output Tray.
The settings you can select are as follows:
Paper type to be selected
Plain
OHT
OHT Interleaved
OHT I/L Printed
The Paper Type setting defaults to [Plain]. Remember, you cannot select
[Offset] when Paper Type other than [Plain] is selected.