User Guide

Print Controller PostScript Option 2-5
Chapter 2 Setup
When selecting [Network Printer]
When personal computers or workstations are connected to a net-
work and you want to print via the network, put a check next to [Add
Network Port], and select the corresponding system.
7. Determine whether the printer name is appropriate. If you are satisfied,
click the [Next] button.
If you want to change the printer name, enter a new name into the [Printer
Name] text box.
The printer name defaults to the model of the main body printer you selected
sach as [Konica 7020 PS], [Konica 7025 PS], [Konica 7030 PS] or [Konica
7035 PS].
8. Once the screen displays the printer name and the selected port, click
the [Finish] button.
The printer driver will be installed.
9. If you want to manually configure the printer, click the [Printer Setup]
button.
The [Konica 7020 PS on LTP1:] (or [Konica 7025 PS LTP1:], [Konica 7030
PS LTP1:], [Konica 7035 PS LTP1:]) window will open.
You can open the [Konica 7020 PS Properties] (or [Konica 7025 PS Proper-
ties], [Konica 7030 PS Properties], [Konica 7035 PS Properties]) window to
manipulate printer settings as the need arises.
Properties windows
The printer properties window will be different for each environment
depending on the Windows environment in which you install the
printer driver.
For more information, refer to “Chapter 3 Printer Driver” (page 3-1).
10. Click the [Exit to Windows] button.
The installation session is over and you go back to the desktop. The [Konica
7020 PS] (or [Konica 7025 PS], [Konica 7030 PS], [Konica 7035 PS]) printer
is now available for use.
You don’t need to restart the computer for the installed printer driver to take
effect.