User Guide

3
Windows – Property Sheets
3-12 Pi5501
4. Paper Source
Selects the machine tray to be used.
Sets the cover page function and the OHP interleaving function.
Paper Source:
Select the machine tray to be used.
The selectable paper sizes are limited by the types of paper take-
up trays installed in the machine.
Available settings:
Auto, Manual Feed, Tray1~4, LCC, LCT
Detail of Paper Source:
Set the cover page function and OHP interleaving function. For
details, see page 3-17.
NOTE
Some paper sizes cannot be selected. For details, refer to the
Operator’s Manual of the machine.
TIPS
Set the paper take-up tray using [Device Options Setting].
The paper take-up tray used is displayed in green on the Printer
Figure.
5. Output Setting
This function selects the tray in the machine to which the paper is to
be distributed.
Settings can also be made for finishing functions including stapling,
hole punching, and folding.
Paper exit destination:
Select the machine tray to which you wish to distribute the prints.
The selectable paper exit trays are limited by the type of finisher
installed in the machine.
Mailbin Finisher: Auto, Mailbin
Except Mailbin Finisher: Auto
Mailbin paper exit destination:
If Mailbin is selected as the paper exit destination, set the mailbin
to which you wish to distribute the paper.
Detail of Output Setting:
Set stapling, punching or folding. For details, see page 3-19.