User Guide

Mail remote notification system manual
6/14
Step6 Test mail sending
Click [Sending test] button and then a test mail is sent to SMTP server. Test mail is sent to [Manager
address] set on Step5. Click [Sending test] to display result of the test mail. If it is failed, please re-confirm
the setting following to error message.
Step7 Set the reception setting.
In the [Extension for maintenance] column at the bottom of the page, input the
password to change the mode then click the initial setting.
The password is “9272”.
Extension for maintenance page (for customer engineer)
The records of sent and received mails listed on mail log on the [Extension for maintenance] page are the
latest 10 mails. Even the main power switch is turned OFF, the communication is logged and kept though
there are some restrictions.