User Guide

5
5-23 Setting up the Printer Board as a PostScript printer
9. Click OK in the (LPT1) Properties dialog box.
N
OTE: You might need to insert the Windows 95 system CD to complete this step
depending on whether the required files are on your hard disk.
10. When prompted to restart the computer, click Yes.
After Windows 95 restarts, you can complete the procedure described in “To prepare
the printer for parallel port printing:” on page 5-20.
Completing the Windows 95 IPX/SPX or IPX (Novell) connection
If you are printing through a Novell server, the Novell network and file server should
be set up before you begin. The file server should be configured with a print server and
print queue for the Printer Board. For details see your NetWare documentation and
Chapter 3.
TO SET UP IPX/SPX PRINTING:
1. Click the Start button, point to Settings, and click Control Panel.
2. Double-click the Network icon.
Make sure that IPX/SPX-compatible Protocol and TCP/IP protocol are both listed in
the Installed Network Components section.
If they are not, see your Windows 95 documentation for instructions.
NOTE: You must enable TCP/IP printing to ensure that all files required for IPX/SPX
will be installed. You can select it and click Remove after you set up IPX/SPX if you do
not need to use the TCP/IP protocol.