User Guide

3-16 Setting up Network Servers

Setting up NetWare Windows clients for printing

Before setting up client workstations for printing, make sure you perform Network

Setup on the Printer Board Touch Panel Display (see page 2-12), and that the settings

reﬂect the entities you created in the NetWare administrator utilities (see page 3-4).

NOTE: For printing to the Printer Board, connect all Windows clients to a Novell Net-

Ware server and permit them to connect to the server or servers on which you deﬁned

a Printer Board queue.

After the Novell server and the Printer Board have been set up, client setup

consists of:

• Installing the networking protocol, binding it to the network adapter card, and

permitting the client to log in to the NetWare ﬁle server.

On Windows 95 Workstations, both the IPX/SPX-compatible protocol and the

Client for NetWare Networks should be loaded from the Network Control Panel.

On Windows 3.1x workstations, the NetWare shell should be installed. On

Windows NT workstations, Client Service for NetWare should be installed. Use the

CSNW option in Control Panel to set printing options and specify a preferred

NetWare server.

• Setting up the Printer Board as a PostScript or PCL printer by installing a PostScript

or PCL printer driver.

• Adding a network port and connecting the workstation to one or more NetWare

queues that have been deﬁned for the Printer Board.

See Chapter 5 for details on how to connect Windows 3.1x, Windows 95 and Win-

dows NT 4.0 workstations.

• Installing other optional client software.

See Chapter 5 for details.