User Guide

System requirements

The following are the minimum computer requirements to install and

operate the Konica 7013 DRIVER and Konica 7013

MONITOR.

CPU: i486DX/66MHz or higher

Operating System: Windows

95, Windows

98, Windows

Me,

Windows NT

4.0, Windows

2000 or

Windows

Hard Disk Drive: At least 10MB of available disk space for installing

RAM: At least 8 MB

Terminal Connector Interface: A bidirectional parallel interface

IEEE1284 (Compatible mode / Nibble

mode / ECP mode)

You will also need a bi-directional parallel interface cable (printer cable)

to connect your machine to your PC.

Note: Actual requirements will vary based on your PC system configura-

tion, the applications and the documents you will print.

Konica 7013 DRIVER

The Konica 7013

DRIVER is a PCL printer driver that enables your soft-

ware applications to access your Konica 7013’s printer features.

The CD supplied with Konica 7013 printer kit includes the following

printer drivers:

• Use the PCL 6 driver to take full advantage of the printer features.

The PCL 6 driver is recommended unless backward compatibility with

previous PCL drivers or older printers is necessary.

• Use the PCL 5e driver if you want to preserve compatibility with older

software applications.

Konica 7013

MONITOR

The CD also includes Konica 7013 MONITOR for Konica 7013 DRIVER

printer software for end-users.

Konica 7013 MONITOR shows the status of your printer and can show and

set the default value of the printer parameters. With it, you can check the

printer status and set printer parameters from your PC easily and

quickly.

1.1