User Guide

Installation
Follow the steps below to install the Konica TWAIN DRIVER for Windows 95,
Windows 98, Windows Me, Windows NT version 4.0, Windows 2000 or
Windows XP.
Before you install the software, you must read the README. TXT file in
the appropriate directory of the CD for important last-minute installation
information and helpful hints:
X:\English\Scanner\XXXXX\README.TXT
Note:“X” is the drive letter for your CD-ROM drive. In “XXXXX”, the
following folder name will be applied according to your Windows
version:
• “win9x_me” for Windows 95/98/Me
• “winnt4_2000” for Windows NT 4.0/2000
• “winxp” for Windows XP
To install the Konica TWAIN DRIVER
1
Start Windows.
Note: If you are using Windows NT 4.0 or Windows 2000 or
Windows XP, you must log in as the Administrator to install
(or uninstall) this TWAIN driver.
2
Insert the CD supplied with Konica 7013 printer kit into the CD-
ROM drive.
3
Click Start and then Run.
4
Type X:\English\Scanner\XXXXX\Setup.exe.
Note: “X” is the drive letter for your CD-ROM drive. “XXXXX” is the
folder name which means your Windows’ version. (See above)
You can also browse through the folders to find the Setup.exe file
for your version of Windows by clicking Browse.
5
Click OK to start the installer software.
6
Follow the instructions that appear on the screen.
To uninstall the Konica TWAIN DRIVER
1
To start the uninstaller program, click on
Start>Settings>Control Panel>Add/Remove Programs,
then select Konica
TWAIN DRIVER
and click on Add/Remove.
2
Follow the instructions that appear on the screen.
2.2