User Guide

5
Using the Utility Mode
5-2 Fax Kit (FX-3)
5.2 Specifying the Machine Settings
From the “MACHINE SETTING” menu, various settings for the machine’s
operating environment can be specified. Refer to the following table for
details on each function.
No. Name Description
1 AUTO PANEL
RESET
This function can be used to set the length of time until the
auto panel reset operation is performed after copying or the
last operation is finished. When the auto panel reset
operation is performed, the Copy mode screen is
automatically displayed.
In Fax mode, the auto panel reset operation is performed
after 1 minute has elapsed, regardless of the setting
specified for this function.
• The manufacturer’s default setting is 1 min.
2 ENERGY SAVE
MODE
For details on this menu, refer to the Di1611/Di2011 User
Manual.
3 AUTO SHUT OFF
4 DENSITY (ADF)
5 DENSITY (BOOK)
6 PRINT DENSITY The density for printing copies, computer printouts or faxes
can be set to one of five settings.
For details on this menu, refer to the Di1611/Di2011 User
Manual.
7 LCD CONTRAST For details on this menu, refer to the Di1611/Di2011 User
Manual.
8 LANGUAGE
9 BUZZER VOLUME This function can be used to set the volume of alarms and
the beep sounded when a key is pressed.
• The manufacturer’s default setting is “LOW”.
10 INITIAL MODE This function can be used to set the mode (Copy mode or
Fax mode) that the machine starts up in or returns to after
the Control Panel is reset.
• The manufacturer’s default setting is “COPY”.