User Guide

Faxing
3
Fax Kit (FX-3) 3-5
To fax using group dialing
If one-touch dial keys have already been programmed with a group of fax
numbers, the fax numbers of all recipients in the group can be specified
by pressing just the corresponding one-touch dial key.
For details on programming one-touch dial keys with a group of fax
numbers, refer to
“Specifying the Setting for “GROUP DIAL”” on
page 6-11.
1 Press the [Fax] key to enter Fax mode.
2 Load the document into the Automatic Document Feeder.
H For details on placing the document on the Original Glass, refer to
“To fax documents positioned on the Original Glass” on page 3-16.
3 If necessary, change the “Resolution” setting (p. 3-13).
4 Press the one-touch dial key ([01]
through [27]) programmed with the
group of fax numbers that you wish
to send the fax to.
5 Press the [Start] key.
The machine automatically starts
scanning the document and
sending the fax.

Tip
If the wrong one-touch dial key has been pressed, press the [Stop]
key, and then press the [Yes] in the next screen that appears.