User Guide

Faxing
3
Fax Kit (FX-3) 3-3
To fax using one-touch dialing
If one-touch dial keys have already been programmed with fax numbers,
the fax number of a recipient can be specified by pressing just the
corresponding one-touch dial key.
For details on programming the one-touch dial keys, refer to “Setting Up
One-Touch Dialing (“ONE-TOUCH DIAL” function)” on page 6-3.
1 Press the [Fax] key to enter Fax mode.
2 Load the document into the Automatic Document Feeder.
H For details on placing the document on the Original Glass, refer to
“To fax documents positioned on the Original Glass” on page 3-16.
3 If necessary, change the “Resolution” setting (p. 3-13).
4 Press the one-touch dial key ([01] through [27]) programmed with the
fax number that you wish to send the fax to.
5 Press the [Start] key.
The machine automatically starts
scanning the document and
sending the fax.

Tip
If the wrong one-touch dial key has
been pressed, press the [Stop] key,
and then press the [Yes] in the next
screen that appears.