User Guide

Using the Utility Mode (Fax)

Fax Kit (FX-3) 6-21

To change/delete a programmed mailbox transmission

1 Select the “FAX REGISTRATION” menu.

H Refer to “Selecting the “FAX REGISTRATION” menu” on

page 6-2.

2 Press the [4] key from the 10-Key

Pad to select “PROGRAM DIAL”.

3 Press the one-touch dial key ([24]

through [27]) programmed with the

mailbox transmission that you wish

to change or delete.

4 Press the [No] key.

5 Using the [ ] and [ ] keys, select

either “EDIT” or “DELETE”, and

then press the [Yes] key.

H If “EDIT” was selected, the

specified recipient is displayed. (Continue with step 6.)

H If “DELETE” was selected, the program dialing settings are deleted

and the “SELECT REGIST.KEY” screen appears again.

6 To change the recipient, press the

[No] key, and then by using the one-

touch dial keys or the speed dial

numbers, or by entering the fax

number using the 10-Key Pad,

specify a different recipient.

7 Press the [Yes] key.

The mailbox ID is displayed.

8 To change the mailbox ID, press the

[No] key, and then use the 10-Key

Pad to enter the new ID.