User Guide

Fax Transmission/Reception Methods
7
Konica 7115F/7118F 7-27
Specifying F codes
When sending faxes
F codes can be specified when the KEYPAD is being used to enter the fax
number of a recipient while sending a fax.
1
Using the KEYPAD, enter the fax
number of the recipient.
2
Press the [ ] key, and then use the
KEYPAD to enter the sub-address.
❍
A number up to 20 digits long
can be entered for the sub-
address.
❍
To enter an SID, continue with step 3.
❍
If an SID will not be entered, continue with step 4.
3
Press the [ ] key, and then use the
KEYPAD to enter the SID.
❍
A number up to 20 digits long
can be entered for the SID.
4
Press the [START] key to begin scanning and sending the fax.