User Guide

5 - 29
Use of
Control Panel
Wake-up
Screen
Fax
Basic screen
Fax
Application
screen
Remote
Station
Registration
screen
Other screens
Simple Fax
Transmission
Placing the
Original on
the Machine
Setting
Transmission
Conditions
Operation
During
Original
Scanning
Sending
Multiple
Originals
Operation
During
Transmission
Reserving
Transmissions
Manual
Transmission
Interrupting
Transmission
Confirmation of
Transmission
Reservation
Documents
Confirming
Setting and
Communication
Results
Intercepted
Transfer of
Received
Documents
Resending
(Restored
transmission )
Sender
Information
Reception
Mode
Manual
Reception
Forced
Memory
Reception
When Unable
to Receive
Reception
Information
Application
Functions
Reports and
Lists
Registration
/Setup
Appendix
Troubleshooting
Selecting a
Remote
Station
Memory
Transmission
Types of
screens
6. Confirm the entry you have made and press the [ENTRY] key.
The parameter is changed. Press the [BACK] key to return to the Relayed Rx
registration list screen.
7. Press the [BACK] key.
You return to the remote station registration screen.
8. Press the [BACK] key.
You return to the Fax Basic screen.
5. Press the [Relay Tx P.W.] key to change the relay password and [Stn. Group No.]
key to change the destination group No. and change the value of the parameter.
4.
Select the relay box you wish to change, using the [▲] or [▼] key, and press the [EDIT] key.
3. Press the [Relay Rx regi/edit] key.
The Relayed Rx registration list screen appears.
Remote station registration screen
5.4 Registering relayed transmission to multiple stations (continued)
Relay Rx registration list screen
Relayed Tx registration/edit screen