User guide

174 | Managing and using the client application
Copy
Copy is available for some embedded clients. If you try to activate a Copy profile on an
unsupported device, the system will display an error message.
Before using a connector, see “Quick reference to using a ShareScan OP connector” on page 166.
That section includes information about performing functions that are common to many
connectors, such as specifying scanner and document settings.
To use Copy:
1
Place your document in the feeder or on the glass.
2 Access the client.
3 On the main ShareScanOP screen, press Copy.
4 Specify the settings. The available settings depend on your device.
5 When you have specified the settings, press Copy. The device copies your document and the
Copy Status dialog box opens.
6 Press Done.
Setting Description
Paper Tray Specifies the paper tray to use.
Color Mode Specifies the color mode. Available only on color devices.
Image Mode Specifies the image mode that best corresponds to the document that
you are copying.
Brightness Move the slider or use the + and - buttons to adjust the brightness.
Number of Copies Specifies the number of copies.
Finisher Allows you to specify the finishing mode.
Two-sided Allows you to specify two-sided mode.
Image Quality
Adjustment
Allows you to remove the background color from the document and to
prevent bleed-thru.