User Manual

22 | Using the connector
Preview
1 When the connector finishes scanning the document, review the scanned images. If
necessary, scan additional pages or re-scan any of the original pages by placing the pages in
the feeder, or on the glass, and then pressing Scan More.
2 Press Document Settings to change any of the settings.
3 When you are ready to store the document, press the delivery button (Send or Next
depending on whether you are running the client on a device with an embedded client or
on a ScanStation).
If you selected User Modify as an option under Document Naming in Connector
Services, the Output File Name screen appears.
4 Enter a name for the scanned document and press Next.
2
3
1
Delivery button
Scan More
Document Settings