User Manual Di181f www.minoltaeurope.
Contents 1 2 3 General Information 1.1 Introduction ...................................................................................... 5 1.2 How Does a Fax Machine Work? .................................................... 5 1.3 Certificate for Machines with CE Marking ..................................... 6 CTR 21 Approval................................................................................ 6 1.4 Safety Precautions....................................................................
Erasing Call Groups ........................................................................ 27 Phone Book ..................................................................................... 27 3.8 4 Advanced Settings ........................................................................ 28 Buzzer Volume ................................................................................ 28 Header.............................................................................................
6 7 8 Reception 5.1 Manual Reception .......................................................................... 47 Default Reception Setting ................................................................ 47 5.2 Automatic Reception ..................................................................... 47 5.3 Memory Reception ......................................................................... 48 5.4 Mailbox Reception .........................................................................
Di181f Rev.
1 General Information 1 General Information 1.1 Introduction Thank you for choosing the Di181f and showing confidence in our product. This machine has a modern design and fulfils today’s requirements of a fax machine. It combines advanced technology with a contemporary appearance. The machine is authorised for use in the public telephone network and is compatible to other fax machines of the communication standard 3.
1 General Information come with the machine, that have to be made when instal-ling, or the settings that can be made at a later stage. Most of the features of the fax machine work independently, so that you can program only the settings you need for the moment and ignore all others. By the way, the word "fax" is a combination of the Latin "facere" (to make) and "simile" (similar) describing the process of making a copy which is similar to the original.
1 General Information 1.4 Safety Precautions Follow the safety advice to ensure safe operation of the machine. G Connect the machine only to a 200 - 240 V/ 50 Hz earthed power point. G Make sure the power is not turned off over night. G Always pull at the plug, never at the wire, when you want disconnect the machine from the power supply. If possible, connect the machine directly to a wall outlet. G To facilitate communication always keep the machine switched on and program the correct user data.
1 1.5 General Information Characteristics Your new fax machine is a compact multi-functional device facilitating your work and reducing your fax communication times. The features of the Di181f include scanning of originals into the memory for delayed transmission, allowing simultaneous reception of fax messages and vice versa. Type G A6 - A3 format, Super G3 mode, Desktop Laser Fax1 G up to 33.
2 Installation 2 Installation 2.1 Control Panel, Displays and Keys $%& 3 )L QH +DO I 7RQH 6 )LQH 86 )L QH )XQFW L RQ 5HV RO XW L RQ (Q WHU %RRN 7; Q Confidential 3UL QW HU Relay Polling TX Polling RX 1 Page TX HQX $XW R 3 3KRWR )XQF WLRQ 1R &RP P ID Set Initial Set *+, $ 3456 O '() -.
2 Installation $%& )L QH +DO I 7RQH 6 )LQH 86 )L QH )XQFW L RQ 5HV RO XW L RQ 3UL QW HU Confidential 3UL QW HU Relay ID Set &R Polling RX Initial Set RU\ Report/List 012 789 :;<= H DO H DO File Cancel '() -.
2 Installation Programmable one-touch keys Confidential Relay Polling TX Polling RX 1 Page TX ID Set Initial Set Dial Set File Cancel Report/List PBX Dial Spac e Rev. / Num Display/Key Function 1 CONFIDENTIAL Press this key for confidential transmission or reception and to set up mailbox transmissions.
2 Installation Confidential Relay Polling TX Polling RX 1 Page TX ID Set Initial Set Dial Set File Cancel Report/List PBX Dial Spac e 2-12 Num Display/Key Function 8 DIAL SET Press this key to store one-touch key, speed dial and group dial numbers. 9 FILE CANCEL Press this key to delete transmission and reception reservations.
2 Installation 2.2 Connect the telephone line cable 1 Plug the other end of the telephone cord into the terminal on the righthand side at the back of the machine. Telephone socket Telephone cable 2 2.3 Initiating the fax option 1 Rev. / Connect the telephone cable to the wall outlet. Switch the machine on and Turn the flip panel over. The Di181f fax option is now ready for operation.
2 2-14 Installation Di181f Rev.
3 Data Entry 3 Data Entry 3.1 Preparation Before all features of your fax machine are available you are obliged to enter several settings. This chapter explains how to set your name, your line type and the remote locations with which you may wish to communicate. You can cancel the setting anytime by pressing [STOP]. The setting will then not be saved. If you do not press any key within 30 seconds your fax machine will return to standby mode. 3.
3 Data Entry Special Characters Press [*] as many times as shown in the table. 3.4 Numeric key * Numeric key * Numeric key * 1 time * * 9 times * , 17 times * : 2 times * & 10 times * ! 18 times * ; 3 times * - 11 times * + 19 times * @ 4 times * / 12 times * = 20 times * % 5 times * ( 13 times * < 21 times * [ 6 times * ) 14 times * > 22 times * ] 7 times * " 15 times * ? 23 times * ’ 8 times * .
3 Data Entry 3.5 Entering your Company Name You can enter either your company name, your name or both. Up to 24 characters can be entered. Refer to 3.3 for instructions on how to make the entries. 1 Press [ENTER]. NAME= KEYPAD/ENTER 2 Enter your name and press [ENTER]. NAME=ABCDEF KEYPAD/ENTER Then enter date and time. 3.6 Entering Date and Time Date and time appear on the display, the activity report and the other fax machine’s printouts. 1 Press [ENTER].
3 3.7 Data Entry Storing Numbers Entering One-Touch Numbers Use this function to store your most frequently called fax numbers for instant recall or to arrange call groups ( for more information refer to "Entering Call Groups"). 1 Press [FUNCTION] and [DIAL SET]. AUTO DIAL <-->/ENTER 2 Press the arrow left key (OT 39) and [ENTER]. SELECT OT KEY OT 3 4 Press the desired one-touch key. Press the one-touch keys [1] to [20] twice to set the one-touch keys [21] to [40].
3 Data Entry 9 Press [ENTER]. 06 -NAME: KEYPAD/ENTER 10 Use the numeric keypad to enter the name and the numeric keypad to select 11 Use the modem speed. [0] : High (33600 bps) [1] : Average (14400 bps) [2] : Low (9600 bps) 12 Press [ENTER]. MODEM press [ENTER]. 0:H/1:M/2:L 0-2/ENTER 0:CONTINUE/1:END 0-1/ENTER the numeric keypad to enter 13 Use another one-touch number and 0:CONTINUE/1:END 0-1/ENTER press [ENTER].
3 Data Entry Entering Speed Dial Numbers Similar to the one-touch keys you can store fax numbers as speed dial numbers. You dial a speed dial number by entering a three-digit identifier code. Up to 150 speed dial numbers can be stored (000-149). 1 Press [FUNCTION] and [DIAL SET]. AUTO DIAL <-->/ENTER 2 Press [ENTER]. AD---:ENTER No. 0-9 3 4 Enter the desired three-digit speed dial number using the numeric keypad and press [ENTER]. Enter the call number.
3 Data Entry 9 Press [ENTER]. 122 -NAME: KEYPAD/ENTER the numeric keypad to enter 10 Use the name and press [ENTER]. MODEM 0:H/1:M/2:L 0-2/ENTER the numeric keypad to select 11 Use the modem speed. [0] : High (33600 bps) [1] : Average (14400 bps) [2] : Low (9600 bps) 12 Press [ENTER]. MODEM 0:H/1:M/2:L 0-2/ENTER 0:CONTINUE/1:END 0-1/ENTER the numeric keypad to enter 13 Use another speed dial number and 0-1/ENTER press [ENTER]. [0] : Continue [1] : End Rev.
3 Data Entry Changing One-Touch- or Speed Dial Numbers You can change one-touch- or speed dial numbers by following the procedure below. 1 Press [FUNCTION] and [DIAL SET]. AUTO DIAL <-->/ENTER 2 Press the arrow left key (OT 39) and [ENTER]. SELECT OT KEY OT 3 4 Press the desired one-touch key. Press the one-touch keys [1] to [20] twice to change the one-touch keys [21] to [40]. Press [ENTER] and enter the new call number. OT 06 :DDD OT/ENTER/CLEAR 06 :7654321 KEYPAD/ENTER 5 Press [ENTER].
3 Data Entry 9 Press [ENTER]. 06 -NAME:DDD KEYPAD/ENTER the numeric keypad to enter 10 Use the name and press [ENTER]. MODEM 0:H/1:M/2:L 0-2/ENTER the numeric keypad to select 11 Use the modem speed. [0] : High (33600 bps) [1] : Average (14400 bps) [2] : Low (9600 bps) 12 Press [ENTER]. the numeric keypad to 13 Use change another one-touch number and press [ENTER]. [0] : Continue [1] : End Rev.
3 Data Entry Erasing One-Touch- or Speed Dial Numbers You can erase one-touch- or speed dial numbers by following the procedure below. 1 Press [FUNCTION] and [DIAL SET]. AUTO DIAL <-->/ENTER 2 Press the arrow left key and [ENTER]. SELECT OT KEY OT 3 3-24 Press the desired one-touch key. Press the one-touch keys [1] to [20] twice to delete the one-touch keys [21] to [40]. 4 Press [CLEAR] to the far right on your control panel.
3 Data Entry Entering Call Groups Your fax machine can scan the same document once and then send it to numerous other fax machines (call groups). Use this function, if you frequently send to the same group. You can program up to 40 groups, each having up to 99 destinations. 1 Press [FUNCTION] and [DIAL SET]. AUTO DIAL <-->/ENTER 2 Press the arrow left key (OT 39) twice and then [ENTER]. SELECT GROUP KEY OT 3 4 Press the desired one-touch key.
3 Data Entry Changing Group Dials You can change group dials by following the procedure below. 1 Press [FUNCTION] and [DIAL SET]. AUTO DIAL <-->/ENTER 2 Press the arrow left key (OT 39) twice and then [ENTER]. SELECT GROUP KEY OT 3 4 5 Press the desired one-touch key. Press the one-touch keys [1] to [20] twice to change the one-touch keys [21] to [40]. Continue to press [ENTER] until you have found the required number and then enter the new call number.
3 Data Entry Erasing Call Groups You can erase group dials by following the procedure below. 1 Press [FUNCTION] and [DIAL SET]. AUTO DIAL <-->/ENTER 2 Press the arrow left key (OT 39) twice and then [ENTER]. SELECT GROUP KEY OT 3 Press the desired one-touch key. Press the one-touch keys [1] to [20] twice to delete the one-touch keys [21] to [40]. 4 Press [CLEAR]. 5 Use the numeric keypad to change another call group and press [ENTER].
3 3.8 Data Entry Advanced Settings You can adjust the machine to your personal requirements with the following settings. Buzzer Volume Use this function to set the buzzer tone, for example, when an error occurs. Follow the procedure below: 1 Press [FUNCTION] and [INITIAL SET]. HEADER <-->/ENTER 2 Press the arrow left key (OT 39) five times and then [ENTER]. 0:OFF/1:ON 0-1/ENTER 3 Use the numeric keypad to select the required setting, then press [ENTER] and [STOP]. 10/21 ’98 12:00 FAX Ready.
3 Data Entry Set relay boxes This function is used to set up your Di181f as a hub for relay transmissions. You can configure up to 10 relay boxes. 1 Press [FUNCTION] and [RELAY]. RELAY TX <-->/ENTER 2 Press the arrow right key (OT 40) and [ENTER]. RELAY BOX No. : ---0-9/ENTER 3 4 5 6 Use the numeric keypad to enter the four-digit relay box number and press [ENTER]. Use the numeric keypad to enter the four-digit relay box ID and press [ENTER][.
3 Data Entry 9 Press [ENTER] and enter the sender’s call number. FAX=01234567 KEYPAD/ENTER [ENTER] and use the 10 Press numeric keypad to select the 0:CONTINUE/1:END 0-1/ENTER required setting. [0] : Continue [1] : End 11 Press [ENTER] to end the process. Erasing Relay Boxes 1 Press [FUNCTION] and [RELAY]. RELAY TX <-->/ENTER 2 Press the arrow right key (OT 40) and [ENTER]. RELAY BOX No.
4 Send 4 Send 4.1 Transmission Notes on Original Documents Your fax machine is capable of transmitting the document sizes below. You can place up to 50 sheets of paper in the A4-format in the Automatic Document Feeder (A3 and B4: 30 pages). Maximum document size 297 mm Effective text width max.
4 Send Photocopy or Carrying Film Documents that meet the following characteristics must be photocopied or placed in a carrying film before they can be sent: G paper sizes less than 148 mm width or less than 100 mm length; G paper lighter than 50g/m2; G folded, torn, wrinkled, damp, rough or curled papercoated or G coated or pressure sensitive paper. Placing the Documents 1 Insert the document face up in the document feeder.
4 Send 2 Place the document in the top lefthand corner and close the cover. You can insert up to 50 pages of A4 into the document feeder. Make sure the pages are well placed and aligned before starting the transmission. If the paper is curled or pages stick together more than one page at a time could be drawn into the machine. This might lead to paper jams or faulty transmissions. In this case you should insert the pages one by one to ensure a correct feeding of the documents.
4 4.2 Send Settings for Sending a Fax Resolution 1 Insert the document into the ADF. If you send documents with normal print or typed documents, adjustments are not necessary. To change the resolution, press RESOLUTION. RESOLUTION has five settings: Standard This is the normal resolution for most typed documents and simple drawings. Fine Fine resolution is suitable for maps, newspaper articles etc. S. Fine This resolution is suitable for fine print e.g. illustrations.
4 Send 4.3 Dialling Methods There are five different dialling methods available. Insert the document face down into the ADF and dial with the dialling method of your choice. Manual Dialling Using the Numeric Keypad 1 Dial the fax number using the 058464 numeric keypad and press KEYPAD/ENTER/START [START]. You can check the number on the display and, if necessary, delete it and then enter the new number. A maximum of 30 digits can be entered using the numeric keypad.
4 Send Automatic Call Groups 1 Press one of the one-touch keys [01] - [40]. If a group is stored, its name will appear on the display. After scanning the document the Di181f will dial automatically. GR01 :OSAKA OT/ENTER/START Telephone Directory The phone book lists all numbers stored in your Di181f. 1 Press [ABBR/DIRECTORY] twice. SELECT KEYPAD KEYPAD/ABBR 2 Press the numeric key showing the first letter of the other fax machine. TEL DIRECTORY : T <-->/KEYPAD/ENTER 3 Press [ENTER].
4 Send 4.4 Memory Transmission Memory transmission is set as default. Since your fax machine is a multifunctional device it is possible to scan documents while your fax machine is sending from memory, receiving or printing. As soon as the current operation is finished the new document will be sent. Memory transmission offers several advantages: As soon as the current operation is finished the new document will be sent. 1 Insert the document face up into the ADF. 10/21 ’98 12:00 FAX Ready.
4 4.5 Send Direct Transmission (1 Page TX) You can send directly from the ADF, if not enough memory is available to scan all documents you want to transmit. This mode will only let you send 1 page. 1 2 Insert the document face up into the ADF. Adjust resolution and contrast, if necessary. Press [FUNCTION] and [1 PAGE]. 10/21 ’98 12:00 FAX Ready. 1 PAGE TX SELECT LOCATION 3 4-38 Dial the number manually, using the one-touch keys or by speed dial numbers and press [START].
4 Send 4.6 Book TX Use this function to send pages from books directly from the glass top without having to first photocopy the pages. 1 2 Place the book face down on the glass. Adjust resolution and contrast, if necessary. Press [BOOK TX] and use the arrow keys to select the document format. 10/21 ’98 12:00 FAX Ready. DOCUMENT:A3 <-->/ENTER 3 Press [ENTER]. FILE-001 MEMORIZED 4 5 Rev. / Use the numeric keypad to select further pages and press [ENTER].
4 4.7 Send Delayed Transmission (Timer) You can use this function to take advantage of lower evening and weekend long-distance rates. You can program up to 20 delayed transmissions. You can only use this function if date and time are stored in the machine. Insert the document face up into the ADF. Adjust contrast and resolution if necessary. 1 2 Dial the number manually, using the one-touch keys or by speed dial numbers and press [ENTER] twice.
4 Send 4.8 Relay Broadcast Initiation This function enables you to use your Di181f as a transmission station. You send a document to one or several fax machines and they send the document to several destinations in turn. If you use several identical machines in your organisation, you can use a tree structured distribution. If, e.g. the hub and the final destinations are abroad you reach all destinations with only one long-distance call. Insert the document face down in the document feeder.
4 Send Machine C Machine D Document Machine B one-touch/ speed dial Machine A Machine E Report Machine F Note To stagger a relay transmission, press [ENTER] twice after you have entered the relay box number, then enter the required time and continue as shown above. 4-42 Di181f Rev.
4 Send 4.9 Polling Transmission The Di181f enables you to transmit documents automatically which the recipient can retrieve when required. The document can even consist of several pages. The polling transmission function enables you to select between standard polling and selective polling. In standard polling mode, any machine of the same type can poll stored documents. In selective polling mode, the receiver must know the passwords before polling documents.
4 Send 5 Press [START]. FILE-001 MEMORIZED 60% The machine scans the document into memory. Deleting Polling Documents 1 Press [FUNCTION] and [INITIAL SET]. LINE SET <-->/ENTER 2 Press the arrow left key (OT 39) three times and [ENTER]. 0:OFF/1:ON 0-1/ENTER 3 4 Use the numeric keypad to select the required setting and press [ENTER]. [0] : Clear [1] : Do not clear Press [STOP]. BULLETIN BOARD <-->/ENTER 10/21 ’98 12:00 FAX Ready. 4-44 Di181f Rev.
4 Send 4.10 Mailbox Transmission Use this function to transmit a document to a mailbox. This is helpful, if only a specific person may read the document. However, both machines must be the same model. The transmission is only executed, if both mailbox ID codes are identical. This prevents the document from being transmitted to a wrong mailbox. The document is scanned into the remote fax machine’s memory and can only be printed if the recipient enters the correct 4-digit mailbox passcode.
4 4.11 Send Deleting Data This function enables you to delete programmed transmissions and data stored in the memory. 1 Press [FUNCTION] and [FILE CANCEL]. FILE CANCEL ENTER 2 3 Press [EINGABE] and use the arrow keys (OT 39 /40) to select the required entry. Press [ENTER]. FILE-001 :OSAKA ->/ENTER FILE-001 :CLEAR The document is deleted and the memory data list is printed automatically. 4-46 Di181f Rev.
5 Reception 5 Reception 5.1 Manual Reception Basically manual reception only makes sense if you are expecting voice calls on the same line. You should keep this in mind when you set the reception mode. As the machine is not equipped with a telephone receiver, a separate phone must be attached to the wall outlet of the telephone line. Only then the manual reception mode is available. Answer the call and press [START]. Default Reception Setting 1 Press [FUNCTION] and [INITIAL SET].
5 5.3 Reception Memory Reception Incoming data is stored in the memory as described below. As soon as the error has been eliminated, the data will be automatically printed. 5.4 G no paper G paper jam G toner low G print cover open G no toner cartridge. Mailbox Reception Use this function to receive a document in your mailbox. This is helpful, if only a specific person may read the document. However, both machines must be the same model.
5 Reception 6 Enter a name using the numeric keypad (up to 16 characters). NAME=OSAKA KEYPAD/ENTER 7 8 Press [ENTER] and use the numeric keypad to select the required setting. [0] :Continue [1] : End 0:CONTINUE/1:END 0-1/ENTER Press [ENTER] to end the process. Delete Mailbox 1 Press [FUNCTION] and [CONFIDENTIAL]. CONFIDENTIAL TX <-->/ENTER 2 Press the arrow right key (OT 40) twice and [ENTER]. MAILBOX No.
5 Reception Printing the content of a mailbox 1 Press [FUNCTION] and [CONFIDENTIAL]. CONFIDENTIAL TX <-->/ENTER 2 Press the arrow right key (OT 40) and [ENTER]. MAILBOX No. : ---0-9/ENTER 3 4 Use the numeric keypad to enter the four-digit mailbox number (00009999) and press [ENTER]. Use the numeric keypad to enter the four-digit password (0000-9999) and press [ENTER]. MAILBOX PASWRD : **** 0-9/CLEAR PRINTING Your fax machine prints the message. 5.
5 Reception 3 Press [START] to begin the polling process. FILE-001 MEMORY REMAIN 100% The machine starts polling. ✎ Note To stagger standard polling, press [ENTER] twice after you have entered the number, then enter the required time and continue as described above. Selective polling 1 Press [FUNCTION] and [POLLING RX]. POLLING RX <-->/ENTER 2 Press the arrow right key (OT 40) and [ENTER].
5 Reception Continuous Polling This function enables you to poll documents from several fax machines within a given period. 1 Press [FUNCTION] and [POLLING RX]. POLLING RX <-->/ENTER 2 Press the arrow right key (OT 40) twice and [ENTER]. CONTINUOUS POLLING SELECT LOCATION 3 4 Enter the desired fax number using either one-touch dialling, speeddialling, the telephone directory or the numeric keypad. Enter the next recipient(s) and press [ENTER] twice.
5 Reception 5.6 Settings for Receiving a Fax Setting the Paper Size This function enables you to select the desired paper format for printing. You can choose between millimetres and inches. 1 Press [FUNCTION] and [INITIAL SET]. LINE SET <-->/ENTER 2 Press the arrow left key (OT 39) and [ENTER]. PAPER SET <-->/ENTER 3 4 Use the numeric keypad to select the required format and press [ENTER]. [0] : Inches [1] : Millimeter Press [STOP]. 0:inch/1:mm 0-1/ENTER 10/21 ’98 12:00 FAX Ready.
5 5-54 Reception Di181f Rev.
6 Reports and Lists 6 Rev. / Reports and Lists Report/List Content Activity Report Includes information such as: time of transmission, transmission mode, recipient, number of pages, transmission time and transmission result (OK/error). Transmission Report Lists the numbers called and the starting time. The report is printed automatically after every transmission and transmission error.
6 6.1 Reports and Lists Basic Report Settings This function enables you to select whether an activity report, a transmission report and a memory report should be printed automatically. 1 Press [FUNCTION] and [INITIAL SET]. LINE SET <-->/ENTER 2 Press the arrow left key (OT 39) once and [ENTER]. ACTIVITY REPORT <-->/ENTER 3 Use the arrow keys to select the desired report. TRANSMISSION REPORT <-->/ENTER 4 5 Press [ENTER] and use the numeric keypad to select the required setting.
6 Reports and Lists 6.2 Printing Reports This function enables you to print the following reports and lists: G Activity report G Memory data list G Confidential data list G Status list G Mailbox list G Selective polling list G Relay box list. 1 Press [FUNCTION] and [REPORT/LIST]. ACTIVITY REPORT <-->/ENTER 2 Use the arrow keys to select the desired report (OT 39 /40). DIAL LIST <-->/ENTER 3 Press [ENTER]. PRINTING The selected report is printed. Rev.
6 6.3 Reports and Lists Printing a One-touch/Group Dial List 1 Press [FUNCTION] and [REPORT/LIST]. ACTIVITY REPORT <-->/ENTER 2 Use the arrow keys to select the "telephone directory". DIAL LIST <-->/ENTER 3 Press [ENTER] and select the desired list using the arrow keys. GROUP DIAL LIST <-->/ENTER 4 Press [ENTER]. PRINTING The desired list is printed. 6.4 Printing a Memory Report 1 Press [FUNCTION] and [REPORT/LIST].
7 Troubleshooting 7 Troubleshooting 7.1 Error Messages on the LCD Rev. / Message Problem Solution INSERT DOCUMENT. There is no document in the ADF. Insert document. Memory Overflow During sending / receiving in memory mode the capacity of the memory was exceeded. Send the document manually (1 Page TX). The memory will hold up to 512 pages. TOO MANY RECIPIENTS. Too many locations have been called. Reduce the number of recipients to the maximum default number.
7 7-60 Troubleshooting Message Problem Solution SD : NOT STORED The speed dial key selected has not been assigned a recipient. Store a number. OT : NOT STORED The one-touch key selected has not been assigned a recipient. Store a number. FILE FULL 1 PAGE TX The maximum number of files has been exceeded. Send manually or delete a file. UNABLE TO ERASE Attempts were made to erase a one-touch/speed dial number which had been stored as a call group. Enter the correct paper size.
7 Troubleshooting 7.2 Error Codes Error code Problem Solution 10 No answer Check the telephone line. Ensure the receiving fax is operational. 11 The number dialled is a standard telephone number. Enter the fax number. 20 The transmission was interrupted by the recipient. 21 Error during 1 page TX. Resend. 25 Memory error Ensure that enough memory is available. Delete files which are no longer needed. 26 ECM error Call the technical service.
7 7-62 Troubleshooting Di181f Rev.
8 Appendix 8 Appendix 8.1 Specifications General Rev. / Size of document Max. A3 (297 mm x 420 mm) Compatibility G3 Max. modem speed 33.600 bps Transmission speed 2 seconds (ITU test document No.1) Coding MR, MH, MMR, JBIG ECM error correction yes Scanning resolution Standard: 8 x 3.85 lines/mm Fine: 8 x 7.7 lines/mm S-Fine: 8 x 15.4 lines/mm US-Fine: 16 x 15.
8 8.2 Appendix Index B Book transmission ................................................................................ 39 Buzzer volume,setting .......................................................................... 28 C Call groups,changing ........................................................................... 26 Call groups,entering ............................................................................. 25 Call groups,erasing ...........................................................
8 Appendix H Header,setting ...................................................................................... 28 L Lists ...................................................................................................... 55 M Mailbox,erasing .................................................................................... 49 Mailbox,print ......................................................................................... 50 Mailbox,setting ...............................................
8 Appendix Relay transmission ............................................................................... 41 Reports ................................................................................................ 55 Reports,print ........................................................................................ 57 Reports,settings ................................................................................... 56 Resolution settings ............................................................
8 Appendix 8.3 CE marking (declaration of conformity) We hereby guarantee that the printer and options covered by this declaration comply with the information given below. This declaration applies to countries within the European Union (EU) Type of product Digital copier (multi-functional) Product name Di181 Options PF-114, PF-207, AF-5, Pi1800, fax for Di181, 4623-161 Standards Rev.
8 8-68 Appendix Di181f Rev.
