User Guide

Storage

Body

•

Do not store this instrument under direct sunlight or near heater. The internal temperature of this

instrument to becomes much higher than ambient temperature which may break this instrument.

• Store this instrument at ambient temperature between 0 and 40˚C and relative humid-

ity 85% or less (at 35˚C) with no condensation. Storage under high temperature and

humidity may deteriorate performance of this instrument. For added safety, we rec

ommend storage with such drying agent at room temperature.

• Take care not to form condensation. Avoid rapid change in ambient temperature when

transferring body for storage.

• Put body in packaging box supplied when purchased or optional soft case(CS-A23)

to store in safe place.

Objective Lens

• For storage, cover with standard accessory lens cap.

Cleaning

Body

• If this unit becomes dirty, wipe with dry and soft cloth. Do not use organic solvent like ben-

zine or thinner and other chemical agent for cleaning. Should none of these methods be

helpful, please contact the nearest KONICA MINOLTA SENSING authorized service facility.

Objective Lens

• Should it be gotten dirt or dust, wipe off with dry and soft cloth or lens cleaning paper.

Do not use organic solvent like benzine or thinner and other chemical agent for clean

ing. Should none of these methods be helpful, contact the nearest KONICA MINOLTA

SENSING authorized service facility.

Notes on transfer

• Use packaging material supplied when purchased to

minimize vibration or shock generated during transfer.

• Use holding cap for the same purpose especially to

protect optical system of this instrument. Set measur

ing angle selector at center 0.2˚ and cover with holding

cap (CS-A24) supplied as standard accessory.

• Put all material including unit and accessories in original packaging material when

returning this instrument for service.

Maintenance

• Periodical checkup is recommended annually to maintain measurement accuracy of

instrument. For details on checkup, please contact the nearest KONICA MINOLTA

SENSING authorized service facility.