User Guide

48
Setting
Setting of Stored Data Protection
Whether warning message appears or not is selectable for the case to store data in the
memory channel with measurement value.
∗ Setting at the shipment from factory : ON
Operation Procedure
1.
Press
ESC
key when menu or target
value setting menu appears.
Measurement screen appears on LCD screen.
2.
Make sure that [ ] appears on left
bottom indicating this instrument
has not been set for SHIFT mode.
If [SFT] appears instead, it means that
instrument is to operate in SHIFT mode.
Press SHIFT key to cancel SHIFT mode.
3.
Press
MENU
key twice..
Menu 2/4 screen appears on LCD screen.
4.
Press either
or key to select
[DATA PROTECT] and then
ENTER
key.
Inversion cursor moves from [DATA PROTECT]
to right to change setting for data protection.
2 3 1, 7 6 4, 5
DATA PROTECT
CH00: < DEFAULT >
Lv 20.80
cd/m
2
x 0.4476
y 0.4477
< MODE > SINGLE
[ ] [ 2° ]
< ANGL > 1 ° VIEW
< SPD > AUTO
< SYNC > 200.00Hz
< LENS > STANDARD
< MEM > AUTO NUM
< MEMORY DATA >
MOOO:(NO DATA)
Lv ------
x ------
y ------
< MENU > 2/4
OBJECTIVE LENS STANDARD
DISPLAY DIGITS 4 FIGURES
MEMORY MODE AUTO NUM
DATA PROTECT ON
BREAK : [ESC]
[ ] [ 2° ]
< MENU > 2/4
OBJECTIVE LENS STANDARD
DISPLAY DIGITS 4 FIGURES
MEMORY MODE AUTO NUM
DATA PROTECT ON
BREAK : [ESC]
[ ] [ 2° ]