User Guide
42
Setting
Selecting Single or Continuous Measurement
Here, measurement mode is selectable between “Single measurement” and “Continuous
measurement”. Former means one measurement for one press and the latter continuous
measurement from one press to another press of any key. In case of “Continuous mea-
surement”, you can also view max and min values during continuous measurement when
measurement is completed.
∗ Setting at the shipment from factory : SINGLE
Operation Procedure
1.
Press
ESC
key when menu or target
value setting menu appears.
Measurement screen appears on LCD screen.
2.
Make sure that [ ] appears on left
bottom indicating this instrument
has not been set for SHIFT mode.
If [SFT] appears instead, it means that
instrument is to operate in SHIFT mode.
Press SHIFT key to cancel SHIFT mode.
3.
Press
MENU
key.
Menu 1/4 screen appears on LCD screen.
2 3 1, 7 6 4, 5
MEAS
MODE
<
MENU
>
1/4
CH SETTING
MEAS MODE SINGLE
SYNC MODE
DELETE
BREAK : [ESC]
[ ] [ 2° ]
CH00:
<
DEFAULT
>
Lv 0.45
cd/m
2
x 0.3855
y 0.4447
<
MODE
>
SINGLE
[ ] [ 2° ]
<
ANGL
>
1
°
VIEW
<
SPD
>
AUTO
<
SYNC
>
NO SYNC
<
LENS
>
STANDARD
<
MEM
>
AUTO NUM
<
MEMORY DATA
>
M003:
Lv 0.54
x 0.4004
y 0.4123