User Guide
38
Setting
Selecting Digit for Chromaticity Display
This is selectable either 4 or 3.
If measurement value on LCD screen is illegible because of blinking, set for 3
digits.
∗ Setting at the shipment from factory : 4 FIGURES
Operation Procedure
1.
Press
ESC
key when menu or target
value setting menu appears.
Measurement screen appears on LCD screen.
2.
Make sure that [ ] appears on left
bottom indicating this instrument
has not been set for SHIFT mode.
If [SFT] appears instead, it means that
instrument is to operate in SHIFT mode.
Press SHIFT key to cancel SHIFT mode.
3.
Press
MENU
key twice.
Menu 2/4 screen appears on LCD screen.
4.
Press either
or
key to select
[DISPLAY DIGITS] and then
ENTER
key.
Inversion cursor moves from [DISPLAY DIGITS]
to right to change digits to display.
2 3 1, 7 6 5 4, 5
DISPLAY
DIGYTS
<
MENU
>
2/4
OBJECTIVE LENS STANDARD
DISPLAY DIGITS 4 FIGURES
MEMORY MODE AUTO NUM
DATA PROTECT ON
BREAK : [ESC]
[ ] [ 2° ]
CH00:
<
DEFAULT
>
Lv 20.80
cd/m
2
x 0.4476
y 0.4477
<
MODE
>
SINGLE
[ ] [ 2° ]
<
ANGL
>
1
°
VIEW
<
SPD
>
AUTO
<
SYNC
>
200.00Hz
<
LENS
>
STANDARD
<
MEM
>
AUTO NUM
<
MEMORY DATA
>
MOOO:(NO DATA)
Lv ------
x ------
y ------
<
MENU
>
2/4
OBJECTIVE LENS STANDARD
DISPLAY DIGITS 4 FIGURES
MEMORY MODE AUTO NUM
DATA PROTECT ON
BREAK : [ESC]
[ ] [ 2° ]