User Guide

37
Setting
Operation Procedure
1.
Press
ESC
key when menu or target
value setting menu appears.
Measurement screen appears on LCD screen.
2.
Make sure that [ ] appears on left
bottom indicating this instrument
has not been set for SHIFT mode.
If [SFT] appears instead, it means that
instrument is to operate in SHIFT mode.
Press SHIFT key to cancel SHIFT mode.
3.
Press
ABS/DIFF
key to show
absolute value (ABS) or color
difference (DIFF) to select.
Measurement value switches between
that for absolute value (ABS) and
difference while pressing key.
Setting remains even after switching OFF (O).
2
3
1
ABS/DIFF
CH00: < DEFAULT >
Lv ------
cd/m
2
x ------
y ------
< MODE > SINGLE
[ ] [ 2° ]
< ANGL > 1 ° VIEW
< SPD > AUTO
< SYNC > 200.00Hz
< LENS > STANDARD
< MEM > AUTO NUM
< MEMORY DATA >
MOOO:(NO DATA)
Lv ------
x ------
y ------
CH00: < DEFAULT >
% Lv ------
%
Δ Lv ------
cd/m
2
Δx ------
Δy ------
< MODE > SINGLE
[ ] [ 2° ]
< ANGL > 1 ° VIEW
< SPD > AUTO
< SYNC > 200.00Hz
< LENS > STANDARD
< MEM > AUTO NUM
< MEMORY DATA >
MOOO:(NO DATA)
%Lv ------
ΔLv ------
Δx ------
Δy ------