User Guide

18
Installing
LCD Screen
Measurement Screen
CH00 : < DEFAULT >
< PEAK >
Lv 7.09
cd/m
2
x 0.3369
y 0.3256
< MODE > SINGLE
[ ] [ 2°
]
< ANGL > 1 ° VIEW
< SPD > AUTO
< SYNC > NO SYNC
< LENS > STANDARD
< MEM > AUTO NUM
< MEMORY DATA >
M001 : SAMPLE1
Lv 38.09
x 0.4039
y 0.3815
Setting status in this instrument is dis-
played.
<ANGL>
Currently selected measuring angle is
displayed.(1°,0.2°,0.1°)(p.88)
<SPD>
Currently selected measuring time is
displayed.(AUTO,LTD.AUTO,
S-FAST,
FAST,
SLOW, S-SLOW, MANU)(p.28)
<SYNC>
Synchronization frequency is displayed
when internal sync measurement mode
is set; NO SYNC is displayed when it is
not set.(p.30)
<LENS>
Currently selected lens type is displayed
.(STANDARD,No.107,No.122)(p.40)
<MEM>
Update method for directory to store
measurement value is displayed.(AUTO
NUM,MAN NUM,AUTOSAVE)(p.46)
Measurement
value ID name
(p.92)
Stored data is displayed.(p.90)
Currently selected observer angle is
displayed.(2°,10°)(p.32)
Battery level mark (
■■■■■■■■■■■■
■■ ■■
■■ ■■ ■■
■■■■ ■■■ ■■
■■■■ ■■■■ ■■
■■■■ ■■■■■ ■■
■■■■ ■■■■■■ ■■
■■ ■■■■■■■ ■■
■■ ■■
■■■■■■■■■■■■
■■■■■■■■■■■■
■■ ■■
■■ ■■ ■■
■■■■ ■■■ ■■
■■■■ ■■■ ■■
■■■■ ■■ ■■
■■■■ ■■
■■ ■■ ■■
■■ ■■
■■■■■■■■■■■■
,
■■■■■■■■■■■■
■■ ■■
■■ ■■ ■■
■■■■ ■■■ ■■
■■■■ ■■■■ ■■
■■■■ ■■■■■ ■■
■■■■ ■■■■■■ ■■
■■ ■■■■■■■ ■■
■■ ■■
■■■■■■■■■■■■
■■■■■■■■■■■■
■■ ■■
■■ ■■ ■■
■■■■ ■■■ ■■
■■■■ ■■■ ■■
■■■■ ■■ ■■
■■■■ ■■
■■ ■■ ■■
■■ ■■
■■■■■■■■■■■■
)(p.24)
 is displayed when the finder shutter is set to au-
tomatically close for every measurement;
 is dis-
played when set to always open.(p.48)
[SFT] is displayed when this instrument is in SHIFT
mode;
[ ] is displayed when SHIFT mode is released.
Memory channel
SINGLE is displayed when
the measurement mode
is set to “Single measure
-
ment”; CONT. is displayed
when set to normal screen
for “Continuous mode”.
(p.42)
Nothing is displayed here
when set to <PEAK> or
<VALLEY> for“Continuous
mode”.
Measurement result
is displayed in the
currently selected
color space. (L
v
xy,
L
v
u'v', L
v
T∆uv,
XYZ ,Dominant
wavelength)(p.34)
CH ID name(p.74)
Calibration channel(p.62)
<PEAK> is displayed when the mea
-
surement result was obtained at
<PEAK> for “Continuous mode”;
<VALLEY> is displayed when the mea
-
surement result was obtained at <VAL
-
LEY> for “Continuous mode”.(p.44)
Nothing is displayed here when it was
obtained at “Single measurement” or
normal screen for “Continuous mode”.
■■■■■■■■■■■■
■■ ■■
■■ ■■ ■■
■■■■ ■■■ ■■
■■■■ ■■■■ ■■
■■■■ ■■■■■ ■■
■■■■ ■■■■■■ ■■
■■ ■■■■■■■ ■■
■■ ■■
■■■■■■■■■■■■
■■■■■■■■■■■■
■■ ■■
■■ ■■ ■■
■■■■ ■■■ ■■
■■■■ ■■■ ■■
■■■■ ■■ ■■
■■■■ ■■
■■ ■■ ■■
■■ ■■
■■■■■■■■■■■■