User Guide

Copy Paper

CF1501/CF2001 4-9

6 Turn the paper type dial on the

drawer to the setting for the type of

paper loaded.

Are postcards loaded into the

1st drawer?

➜ If postcards are loaded into the

1st drawer, set the paper type

dial to “Thick 1”.

✎

Setting the Paper Size

The default setting for the paper size of the 1st drawer is “Auto Detect”.

For postcards, non-standard or inch paper sizes, change the paper

size according to the procedure in the following section.

To set the paper size for the 1st drawer

1 Press the [Utility] key to enter Utility

mode.

2 Touch [User’s Choice].

CF2001.book Page 9 Friday, January 12, 2001 10:22 AM