User Guide

3
Before Making Copies
3-20 CF1501/CF2001
6 Start key • Press to start the copy operation.
• If this key is pressed while the copier is warming up, the
copy job is delayed until the copier is finished warming
up. See p. 3-25.
• The [Start] key indicator lights up in green to indicate that
the copier can begin copying. The [Start] key indicator
lights up in orange to indicate that the copier cannot
make copies.
7 Stop key • Press to stop a continuous copy operation.
8 C (clear) key • Press to reset the number of copies to “1”.
• Press to erase a setting, such as the zoom ratio or size,
selected using the keypad.
9 Panel Reset key • Press to reset all copy functions and settings to their
defaults. (All selected settings are cancelled.)
See p. 3-24.
* Stored zoom ratios, stored job settings, and interrupted or
delayed copy jobs are not cancelled.
10 Interrupt key • Press to interrupt a copy job. (The [Interrupt] key
indicator lights up in green to indicate that the copier is
in Interrupt mode.)
• Press again to cancel Interrupt mode or to return the
copier to the mode before it entered Interrupt mode. See
p. 3-26.
11 Energy Saver key • Press to enter Energy Saver mode. See p. 3-25.
12 Access key • Press when making copies using an access code.
See p. 3-27.
13 Copy key • Press to enter Copy mode and use the copier as a
copier.
• The [Copy] key indicator lights up in green to indicate
that the copier is in Copy mode.
14 Scan key • Press to enter Scanner mode and use the copier as a
color scanner.
• The [Scan] key indicator lights up in green to indicate
that the copier is in Scanner mode.
15 Keypad • Use to type in the number of copies to be made.
• Use to type in the zoom ratio.
• Use to type in the various settings.
No. Part Name Description
CF2001.book Page 20 Friday, January 12, 2001 10:22 AM