User Guide

9
Administrator Mode Operations
9-28 CF1501/CF2001
❍ Check that the left margin of the
printed test pattern is 3.0 mm.
❍ If the left margin is not as
specified, touch and to
adjust it, and then touch [Enter].
Setting a higher positive number
makes the margin wider; setting a
higher negative number makes
the margin narrower.
❍ Repeat step 3 until the left margin
meets its specification.
?
What is the standard setting?
➜ Before adjusting the third or fourth
paper drawer, enter the same
adjustment value for the first or second paper drawer and check
the test pattern.
4 In the Expert User’s Mode screen, touch [Exit].
5 In the Administrator Mode screen, touch [Exit].
6 In the Utility screen, touch [Exit].
b: 3.0 mm ± 1.0 mm
b
CF2001.book Page 28 Friday, January 12, 2001 10:22 AM