User Guide

9
Administrator Mode Operations
9-26 CF1501/CF2001
❍ Check that the top margin of the
printed test pattern is 5.0 mm.
❍ If the top margin is not as
specified, touch and to
adjust it, and then touch [Enter].
Setting a higher positive number
makes the margin wider; setting a
higher negative number makes
the margin narrower.
❍ Repeat step 2 until the top margin
meets its specification.
?
Do you wish to make this
adjustment for other types of
paper?
➜ Load the appropriate paper into
the multipurpose paper drawer (1st drawer), change the paper
type dial to the appropriate paper setting, and then perform step 2.
3 In the Expert User’s Mode screen, touch [Exit].
4 In the Administrator Mode screen, touch [Exit].
5 In the Utility screen, touch [Exit].
a: 5.0 mm ± 1.0 mm
a
CF2001.book Page 26 Friday, January 12, 2001 10:22 AM