User Guide

Administrator Mode Operations
9
CF1501/CF2001 9-23
To set the “Color Shift Correction” parameters
If a difference can be seen between the document and the copy, fine
adjustments of the color shift can be made.
1 In the Expert User’s Mode screen,
touch [Color Shift Correction] for the
color that you wish to adjust.
The corresponding Color Shift
Correction screen appears.
2 Load paper (A3L) into any paper
drawer, and then press the [Start] key
to print out the test pattern.
Check the printed test pattern for the
amount of color shifts. To make fine
adjustments manually, select “X”, “Y”
or “θ”, and then touch and
to specify the desired adjustment.
After all adjustments are made, touch
[Enter].
Check the printed test pattern, and then repeat the step described
above until there are no longer any color shifts. When the adjustment
is finished, touch [Enter].
?
Do you wish to adjust another color?
➜ Adjust other colors as described
in this procedure.
3 In the Expert User’s Mode screen, touch [Exit].
4 In the Administrator Mode screen, touch [Exit].
5 In the Utility screen, touch [Exit].
Before adjustment After adjustment
CF2001.book Page 23 Friday, January 12, 2001 10:22 AM