User Guide

9
Administrator Mode Operations
9-14 CF1501/CF2001
4 Touch [Gradation Adjust].
The Gradation Adjust screen
appears.
5 Load paper (A3L) into any paper
drawer, and then press the [Start]
key to print out the gradation
adjustment test pattern.
?
Are more than one of the
indicated paper sizes already
loaded into paper drawers?
➜ The paper size for printing the
test pattern will be chosen
according to the following order: A3L, 11 × 17L, A4C, LetterC
6 Place the printed test pattern on top
of the original glass, and then place
five more sheets of blank paper on
top of the printed test pattern page.
?
Is the correct type of paper for
printing the test pattern loaded?
➜ Be sure that standard paper (64
to 90 g/m
2
) is loaded.
?
Was the test pattern not
printed?
➜ It takes some time for the test pattern to be printed. Please wait a
little while.
7 Close the original cover, and then press the [Start] key to begin
adjusting the gradation. When the color gradation has been adjusted,
the Administrator Mode screen appears.
8 Repeat steps 5 through 8 three times.
9 In the Administrator Mode screen, touch [Exit].
10In the Utility screen, touch [Exit].
CF2001.book Page 14 Friday, January 12, 2001 10:22 AM