User Guide

8
Utility Mode Operations
8-16 CF1501/CF2001
To set the “Energy Save Mode” parameter
This parameter can be used to specify the length of time (between 1 and
240 minutes) after the last operation until the copier automatically enters
Energy Saver mode. The default setting is “15 min.”
1 In the User’s Choice screen, touch
[Energy Save Mode].
2 Using the keypad, enter the desired
number of minutes, and then touch
[Enter].
?
Do you wish to change the
number of minutes entered?
➜ Press the [C] (clear) key to
erase the entered number, and
then use the keypad to enter the
correct number of minutes.
3 In the User’s Choice screen, touch [Exit].
CF2001.book Page 16 Friday, January 12, 2001 10:22 AM