User Guide

7
Advanced Operations
7-30 CF1501/CF2001
7.9 Inserting Pages Between Copies of Overhead
Transparencies (“OHP Interleaving” Function)
After each overhead transparency is copied, a page from a different paper
source can be added to the stack of transparencies as an overleaf. In
order to use this function, the overhead transparencies should be loaded
into the multipurpose paper drawer (1st drawer).
✎
Note
We recommend loading the overleaf paper with the same orientation
as the document into any drawer other than the 1st drawer.
To set the “OHP Interleaving” function
1 Position the document(s) to be copied. (Refer to page 5-1 for more
detail.)
2 Load the overhead transparencies into the 1st drawer, and then set
the paper type dial on the drawer to “OHP”.
3 Select the desired color mode. (Refer to page 3-19 for more detail.)
4 Touch [Auxiliary].
The Auxiliary screen appears.
5 Touch [OHP Interleaving].
CF2001.book Page 30 Friday, January 12, 2001 10:22 AM