User Guide

6
Basic Operations
6-20 CF1501/CF2001
6.7 Specifying the Copy Density
Density settings
G Background:
This density can be set to adjust itself automatically or it can be
manually set to one of eight levels.
❍ If the background density is set to “Auto”, the background of the copy
is automatically adjusted according to the background of the original
document.
❍ To prevent the image on the back of newspaper or magazine articles
from being copied, select a setting toward “Lighter”. To copy pale
colors in a bright area of the image, select a setting toward “Darker”.
Since selecting a setting too much toward “Darker” may print the
image on the back of the document or selecting a setting too much
toward “Lighter” may produce a very faint copy, select the appropriate
level depending on the document.
G Density:
This density can be set to one of eight different levels.
❍ Fine adjustments can be made to the copy density using the “Density”
parameter of the “Color Adjustment” function on the Auxiliary screen.
For more details, refer to the section “To adjust the density” on
page 7-29.
To specify the copy density before copying
1 Position the document(s) to be copied. (Refer to page 5-1 for more
details.)
2 Select the desired color mode. (Refer to page 3-19 for more details.)
3 Make sure that the Basic screen is
displayed, and then touch [Original/
Density].
CF2001.book Page 20 Friday, January 12, 2001 10:22 AM