User manual
Table Of Contents
- magicolor 1650EN
- Contents
- Ch.1 Introduction
- Ch.2 Using the Printer Driver
- Ch.3 Using the Status Monitor (Windows Only)
- Ch.4 Printer Control Panel and Configuration Menu
- Ch.5 Media Handling
- Ch.6 Replacing Consumables
- Ch.7 Maintaining the Printer
- Ch.8 Troubleshooting
- Ch.9 Installing Accessories
- Appendix
Configuration Menu Overview4-26
SERVICE MENU
With this menu, the service representative can adjust the printer and perform
maintenance operations. This menu cannot be used by the user.
SET
ADMIN
PASSWD
Settings: the last four digits of the printer
serial number
Specify the administrator password for
displaying the administrator menus. The
specified password is applied only if
MAIN MENU/SYSTEM DEFAULT/
SECRITY/CONFIG/ENABLE
is set to
ON.
The password can contain a maximum of
16 characters.
" Empty passwords are not allowed.
FORMAT ERASE
FLASH
Settings
YES/NO
Select whether or not to initialize the flash RAM.
If YES is selected, the flash RAM is initialized.
RESTORE
/SAVE
RESTORE
FACTORY
Settings
YES/NO
Select whether or not all menu items are reset to
their initial settings.
If
YES is selected, all menu items are reset to their
initial settings.
SAVE
CUSTOM
Settings
YES/NO
Select whether or not all changed menu settings are
saved.
If YES is selected, all changes are saved.
RESTORE
CUSTOM
Settings
YES/NO
Select whether or not menu items are reverted to
the previously saved settings.
If YES is selected, the menu items revert to the
previously saved settings.