User manual
Table Of Contents
- magicolor 1650EN
- Contents
- Ch.1 Introduction
- Ch.2 Using the Printer Driver
- Ch.3 Using the Status Monitor (Windows Only)
- Ch.4 Printer Control Panel and Configuration Menu
- Ch.5 Media Handling
- Ch.6 Replacing Consumables
- Ch.7 Maintaining the Printer
- Ch.8 Troubleshooting
- Ch.9 Installing Accessories
- Appendix
Configuration Menu Overview4-10
CUSTOM
SIZE
WIDTH
(xx)
Settings
92-216 mm
(3.63-8.50 inch)*
* With inch measurements, the
decimal point does not appear
in the message window.
For example, 3.63 inches
appears as 363.
Specify the width of the custom-sized
paper loaded into Tray 1.
" On the model for North America,
the settings appear in inches and
the menu item appears as
WIDTH(IN). On the models for
all other regions, the settings
appear in millimeters and the
menu item appears as
WIDTH(MM).
LENGTH
(xx)
Settings With plain paper
195-356 mm
(7.69-14.01
inch)*
With thick stock
184-297 mm
(7.24-11.70
inch)*
* With inch measurements, the
decimal point does not appear
in the message window.
For example, 7.69 inches
appears as 769.
Specify the length of the custom-sized
paper loaded into Tray 1.
" On the model for North America,
the settings appear in inches and
the menu item appears as
LENGTH(IN). On the models for
all other regions, the settings
appear in millimeters and the
menu item appears as
LENGTH(MM).