Datasheet

Konica Minolta bizhub C364e/C284e/C224e
Specification & Installation Guide
13
Component Considerations
AU-102 Biometric Authentication Unit
Biometric Sensor System Transmission-type optical system
Verification Time Approx. 1 sec. or less
Interface USB 2.0
Dimensions WxDxH Approx. 2.32" x 3.25" x 2.94"
Weight Approx. 3 oz. (excluding USB cable)
Max. Power Consumption DC 5 V, 500 mA
System Conditions Ambient temperature: 41º to 95º (F)
(during operation) Humidity: 20% to 80% (No dew condensation)
System Conditions Ambient temperature: 32º to 122º (F)
(during non-operation) Humidity: 20% to 80% (No dew condensation)
MFP Compatibility bizhub C754, C654, C652DS, C652, C554, C552DS, C552,
C454, C452, C364e, C364, C360, C284e, C284, C280, C224e,
C224, C220, 754, 654, 552, 423, 363, 283, 223. Please check
MyKonicaMinolta.com on a regular basis forcompatibility updates.
NOTE: WT-506 Working Table is required for AU-102 Biometric Authentication Unit.
AU-201H HID Proximity Card Authentication Unit
Dimensions (WxHxD) 3.625"x2.5"x0.625"
Weight 0.25 lb.
Power Supply Supplied from USB Port
System Conditions Ambient Temperature: 32°to 104° F
(operating mode) Humidity: 20% to 85%
System Conditions Ambient Temperature: -4°to 122° F
(non-operating mode) Humidity: 20% to 85%
Radio Law Division Self-Guided Read-Write Communication Facility
Applicable Card ISO 14443 Type A, FeliCa-based non-contact IC Card
Acquired Standard VCCI Class B
Compatible Computer CPU: PC/T Compatible, 1 GHz or more
Memory: 128 MB or more
HDD: 100 MB or more free space
Monitor: 800x600 pixels, 16-bit color or more
Network: TCP/IP
Application: Microsoft Internet Explorer 6.0 (SP1) or later
Microsoft .NET Framework (SP1) or later
MFP Compatibility bizhub C754, C654, C650, C554, C552, C550, C454, C452, C451,
C364e, C364, C360, C353, C284e, C284, C280, C253, C224e,
C224, C220, C203, 754, 654, 552, 501, 423, 363, 283, 223.
Please check MyKonicaMinolta.com on a regular basis
forcompatibility updates.
NOTE: WT-506 Working Table or MK-735 Mount Kit (internal mount) is required for AU-201H HID Proximity
Card Authentication Unit.
AU-202H AU-204H
KP-101
AU-211P
AU-202H AU-204H
KP-101
AU-211P