User Guide

5.3 Specifying a Zoom Setting

Konica 8020/8031 5-9

Specifying Copy Settings Chapter 5

Minimizing (“Minimal” Setting)

The copy is slightly reduced (×0.930).

G Selecting the “Minimal” setting ensures that any part of the original positioned

at the edge of the page will not be cut off in the copy.

G The zoom ratio of the “Minimal” setting can be changed to any ratio between

×0.900 and ×0.999.

H For details on changing the zoom ratio, refer to “Specifying a Custom Zoom

Ratio (“CustomZoom” Setting)”.

Zooming

Any zoom ratio (between ×0.250 and ×4.000) can be specified.

G Touch and to specify the desired zoom ratio. Each

time or is touched, the zoom ratio is increased or

decreased by an increment of ×0.001.

Custom Sizing (“CustomZoom” Setting)

Any zoom ratio (between ×0.250 and ×4.000) can be specified.

G Use the keypad to enter the desired zoom ratio.

G Up to two zoom ratios entered using the keypad can be stored.

Vertical and Horizontal Scaling (“X/Y Zoom” Setting)

The copy size can be changed by specifying different scaling proportions (between

×0.250 and ×4.000) for the vertical and the horizontal dimension.

To specify a Zoom setting

Touch [Zoom].

A screen appears, showing the available Zoom settings.

Select the desired Zoom setting.